FTA Drug & Alcohol
Regulation Updates
Issue 35, page 4
FOR YOUR INFORMATION
   
List of EBTs Expanded The Conforming Products List (CPL) that identifies breath testing instruments that meet the Model Specifications for Evidential Breath Testing Devices was updated on December 17, 2007. The updated CPL, published by the National Highway Traffic Safety Administration (NHTSA), can be found in the Federal Register, Volume 72, No. 241, pages 71480-71483. When viewing the CPL, a special note should be made that only those devices listed without an asterisk (*) were tested at Breath Alcohol Concentrations (BACs) of 0.000, 0.020, and 0.040 and are authorized for use in confirmatory alcohol testing under the DOT alcohol testing program.

The update added six additional instruments to the existing list of seventy-seven makes and models resulting in a total of eighty-three instruments that currently conform to the specifications. The new instruments added to the CPL are:
  • Intoxilyzer 240 manufactured by CMI
  • Alcotest 9510 manufactured by Draeger Safety, Inc.
  • AlcoQuant 6020 manufactured by EnviteC
  • EC-IR-II (enhanced with serial numbers above 10,000) manufactured by Intoximeters, Inc.
  • Phoenix 6.0 manufactured by Lifeloc Technologies, Inc.
  • ALC-PRO II (US) manufactured by Tokai-Denshi, Inc.
Meth Labs-Know What to Look For Methamphetamine is a potent central nervous system stimulant that is manufactured in clandestine labs in urban and rural communities throughout the United States. Reckless practices of untrained “cooks” can result in explosions, fires, and extensive environmental contamination. The manufacturing process generates approximately six pounds of hazardous toxic waste for each pound of methamphetamine produced. Surplus chemicals, solvents and by-products are often dumped down household drains, storm drains, wells or directly onto the ground.

Many of the chemicals used to manufacture methamphetamine are readily available in transit system maintenance facilities. Managers should be aware of substances used, by-products and waste generated, and signs of a meth lab operation to ensure that the transit system does not fall victim to criminal activity.
Products Used to Manufacture Methamphetamine
  • Alcohol
  • Toluene (brake cleaner)
  • Ether (engine starter)
  • Sulfuric Acid (drain cleaner)
  • Red Phosphorous (matches or road flares)
  • Salt
  • Iodine (teat dip)
  • Lithium (batteries)
  • Trichloroethane (gun scrubber)
  • MSM (cutting agent)
  • Sodium Metal
  • Methanol/Alcohol (gasoline additives)
  • Muriatic Acid
  • Anhydrous Ammonia (farm fertilizer)
  • Sodium Hydroxide (lye)
  • Pseudoephedrine/Ephedrine (cold tablets)
  • Acetone
  • Kitty Litter
  • Ammonium Sulphate Fertilizer
  • Liquid Propane
  • Dry Ice
  • Drierite
Other Signs of a Meth Lab
  • Chemical odors coming from buildings or garbage.
  • Garbage contains numerous empty bottles and containers of substances used in the manufacturing process.
  • Coffee filters, bed sheets, or other material stained from filtering red phosphorous.
  • Evidence of chemical or waste dumping.
  • Jugs/bottles, pails/buckets, plastic storage containers, and ice chests.
  • Gas cans, propane cylinders, funnels, and laboratory beakers/glassware.
FTA Drug & Alcohol Regulation Updates For Your Information Page 4 Winter 2008
<< Previous Page     Next Page >>